Serial console
Serial output from the firmware.
Prototype
A photo of the actual setup.
Schematic
Wire up the hardware accordingly
Use GPS module PA1010D with Arduino M0 (SAMD21G) to display GPS data.
#define GPSSerial Serial1
void setup() {
while (!SerialUSB) {}
SerialUSB.begin(115200);
GPSSerial.begin(9600);
SerialUSB.println("Hello GPS");
}
void loop() {
if (SerialUSB.available()) {
char c = SerialUSB.read();
GPSSerial.write(c);
}
if (GPSSerial.available()) {
char c = GPSSerial.read();
SerialUSB.write(c);
}
}BOARD?=arduino:samd:mzero_bl
PORT := $(shell ls /dev/cu.usbmodem*)
.PHONY: default lint all flash clean
default: lint all flash clean
lint:
cpplint --extensions=ino --filter=-legal/copyright *.ino
all:
arduino-cli compile --fqbn $(BOARD) ./
flash:
arduino-cli upload -p $(PORT) --fqbn $(BOARD) ./
clean:
rm -f .*.bin
rm -f .*.elf
rm -f .*.hexSerial output from the firmware.
A photo of the actual setup.
Wire up the hardware accordingly