GPS parsing with PA1010D and M0

GPS PA1010D UART M0

Pre-requisites

GPS PA1010D with Arduino M0

Use GPS module PA1010D with Arduino M0 (SAMD21G) to display parsed GPS data with latitude and longitude in degrees.

Using Google maps to view lat,long

Right click the spot on Google maps
Click “What’s here?”
Click the lat,long in the card at the bottom
View the lat,long data in degrees and decimal at the left sidebar

Google Maps with Lat Long information

Code

Download code

#include <Adafruit_GPS.h>
#define GPSSerial Serial1

Adafruit_GPS GPS(&GPSSerial);

#define GPSECHO false

uint32_t timer = millis();

void setup() {
  while (!Serial) {}
  SerialUSB.begin(115200);
  SerialUSB.println("Adafruit GPS library basic test!");

  GPS.begin(9600);
  GPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCGGA);
  GPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ);
  GPS.sendCommand(PGCMD_ANTENNA);

  delay(1000);

  GPSSerial.println(PMTK_Q_RELEASE);
}

void loop() {
  char c = GPS.read();

  if (GPS.newNMEAreceived()) {
    if (!GPS.parse(GPS.lastNMEA())) {
      return;
    }
  }

  if (millis() - timer > 2000) {
    timer = millis();
    SerialUSB.print("\nTime: ");
    if (GPS.hour < 10) { SerialUSB.print('0'); }
    SerialUSB.print(GPS.hour, DEC); SerialUSB.print(':');
    if (GPS.minute < 10) { SerialUSB.print('0'); }
    SerialUSB.print(GPS.minute, DEC); SerialUSB.print(':');
    if (GPS.seconds < 10) { SerialUSB.print('0'); }
    SerialUSB.print(GPS.seconds, DEC); SerialUSB.print('.');
    if (GPS.milliseconds < 10) {
      SerialUSB.print("00");
    } else if (GPS.milliseconds > 9 && GPS.milliseconds < 100) {
      SerialUSB.print("0");
    }
    SerialUSB.println(GPS.milliseconds);
    SerialUSB.print("Date: ");
    SerialUSB.print(GPS.day, DEC); SerialUSB.print('/');
    SerialUSB.print(GPS.month, DEC); SerialUSB.print("/20");
    SerialUSB.println(GPS.year, DEC);
    SerialUSB.print("Fix: ");
    SerialUSB.print((int)GPS.fix);
    SerialUSB.print(" quality: "); SerialUSB.println((int)GPS.fixquality);
    SerialUSB.print("Time [s] since last fix: ");
    SerialUSB.println(GPS.secondsSinceFix(), 3);
    SerialUSB.print("    since last GPS time: ");
    SerialUSB.println(GPS.secondsSinceTime(), 3);
    SerialUSB.print("    since last GPS date: ");
    SerialUSB.println(GPS.secondsSinceDate(), 3);
    if (GPS.fix) {
      SerialUSB.print("Location: ");
      SerialUSB.print(GPS.latitude, 4); SerialUSB.print(GPS.lat);
      SerialUSB.print(", ");
      SerialUSB.print(GPS.longitude, 4); SerialUSB.println(GPS.lon);
      SerialUSB.print("Speed (knots): "); SerialUSB.println(GPS.speed);
      SerialUSB.print("Angle: "); SerialUSB.println(GPS.angle);
      SerialUSB.print("Altitude: "); SerialUSB.println(GPS.altitude);
      SerialUSB.print("Satellites: "); SerialUSB.println((int)GPS.satellites);
    }
  }
}

Makefile

BOARD?=arduino:samd:mzero_bl
PORT := $(shell ls /dev/cu.usbmodem*)

.PHONY: default lint all flash clean

default: lint all flash clean

lint:
	cpplint --extensions=ino --filter=-legal/copyright,-readability/casting *.ino

all:
	arduino-cli compile --fqbn $(BOARD) ./

flash:
	arduino-cli upload -p $(PORT) --fqbn $(BOARD) ./

clean:
	rm -f .*.bin
	rm -f .*.elf
	rm -f .*.hex

Serial console

Serial output from the firmware.