Serial console
Serial output from the firmware.
Display temperature and humidity values with sensor HTS221 on Arduino Nano 33 BLE Sense board.
Install the dependancy:
arduino-cli lib install Arduino_HTS221
#include <Arduino_HTS221.h>
void setup() {
Serial.begin(9600);
while (!Serial) {}
if (!HTS.begin()) {
Serial.println("Failed to initialize humidity temperature sensor!");
while (1) {}
}
}
void loop() {
float temperature = HTS.readTemperature();
float humidity = HTS.readHumidity();
Serial.print("Temperature = ");
Serial.print(temperature);
Serial.println("°C");
Serial.print("Humidity = ");
Serial.print(humidity);
Serial.println("%");
Serial.println();
delay(1000);
}BOARD?=arduino:mbed:nano33ble
PORT?=/dev/cu.usbmodem14*
BUILD=build
.PHONY: default lint all flash clean
default: lint all flash clean
lint:
cpplint --extensions=ino --filter=-legal/copyright *.ino
all:
arduino-cli compile --fqbn $(BOARD) --output-dir $(BUILD) ./
flash:
arduino-cli upload --fqbn $(BOARD) --port $(PORT) --input-dir $(BUILD)
clean:
rm -r buildSerial output from the firmware.